Author Topic: Another Space Dwarf conversion thread... (Read 249631 times)

beefcake · « **Reply #400 on:** March 06, 2018, 10:23:52 AM »

lol. Well I made that Iron Golem for the Build Something on LAF. Which may or may not become commercially available due to one of the companies I have sold some sculpts to seeing it on my Flickr account. I never actually planned on that one getting out there (Sorry derailing)

Inso · « **Reply #401 on:** March 08, 2018, 11:40:42 AM »

I hope it goes well for you and you get your work out there in 'shop land'

... It's always cool when that happens.

In today's little update, a top hatch, handle, front vent and some eyebrows have been added. Just for the record, the arms and top weapons are not glued in place yet... and the bodies are not attached to the base (so the pose hasn't been fixed yet)

:

I will be fettling the bodies and getting them finished before moving on to the arms

.

beefcake · « **Reply #402 on:** March 09, 2018, 03:51:21 AM »

Just saw your snipers on facebook. Congrats on getting them up there too.

somaticon · « **Reply #403 on:** March 10, 2018, 04:58:56 PM »

Those are some impressive sculpts congrats on getting some of the sculpts sold.

Inso · « **Reply #404 on:** March 12, 2018, 08:08:16 PM »

In other news... the Squat Berserker has been sold to Short Wars now

. He will be available from here in good time:

http://www.shortwars.co.uk/

The miniature in question didn't fare particularly well in the competition but the ones above it were worthy of being there. Here's my now posted Berserker:

As for the Halfling snipers... they can now be found for sale over at CP models

:

https://cpmodels.co.uk/product/ru13-halfling-snipers-full-gillie-suits/

Most of the money from the sculpts I have sold has gone to charitable causes so everyone is a winner

Inso · « **Reply #405 on:** March 13, 2018, 08:01:47 PM »

Nearly finished

:

Inso · « **Reply #406 on:** March 15, 2018, 09:54:16 AM »

These are now as finished as they will ever be. Thorsen on the left, Ranulf on the right

:

They will be glued down and then I will prime them as soon as the weather lifts

Inso · « **Reply #407 on:** March 16, 2018, 05:12:38 PM »

I have now primed the dreads:

Now that I have got as far as I can with them, I thought I'd see what I could find in the loft and managed to uncover my Bullgryn squad. Only one of them had been converted... and he didn't have any weapons but luckily, I had thought about that earlier and bagged a lot of Bullgryn bits from EBay. With the bits already available, it was merely a case of a bit of sawing, drilling, pinning and gluing and I soon ended up with this:

He's a converted, Mantic, Dreadball Ork with GW weapons. He still needs some putty work to fill gaps and sort out a few niggles... but he's pretty much there

. I have another four sat in a box beside me so I have enough for a squad of five. Tidy

.

Inso · « **Reply #408 on:** March 25, 2018, 04:44:29 PM »

The competition sculpt (Squat Berserker) has been cast up and I was sent a couple of copies so I painted one up:

A bit of back-story

:

https://i.imgur.com/2lt2MPo.jpg

beefcake · « **Reply #409 on:** March 28, 2018, 11:09:50 AM »

That's quick casting! Nice job too. Like the hammer colour.

Inso · « **Reply #410 on:** April 13, 2018, 07:13:52 PM »

TANK!

(just base coated at the moment... but yes... that IS paint on there

).

beefcake · « **Reply #411 on:** April 13, 2018, 10:25:36 PM »

Very squat looking. Well done.

Inso · « **Reply #412 on:** April 15, 2018, 03:14:02 PM »

It's a Meng toon tank... all I have changed are the weapons

It makes conversion MUCH simpler than cutting up 1/35th Tamiya tanks

Inso · « **Reply #413 on:** April 22, 2018, 04:23:24 PM »

Just need some decals to arrive now

:

I've ordered some decals from here:

http://domsdecals.com/

and another two tanks from EBay. They will be converted to be the same as this one.

Inso · « **Reply #414 on:** April 26, 2018, 09:23:04 PM »

... and so it begins again

. Two more Punishers have arrived:

I have the pens, I have the lascannons and I have the sprue for the punisher cannon.

Once they are converted, that will be the first section of the tank company complete. Then another two lots of three and a command tank

.

Inso · « **Reply #415 on:** May 06, 2018, 07:53:53 AM »

Just a quick post to show off the second painted tank:

The third tank has been washed and will start this week. It'll be getting a visible tank commander to denote it as a lead tank but he won't be a tank commander, rules wise... he'll just be a normal tank (he'll just have a normal helmet rather than a significantly leader-like hat/helmet).

See? I can paint things occasionally

Inso · « **Reply #416 on:** May 25, 2018, 11:26:24 AM »

I've got a little bit further on the armour now. The platoon leader has been sculpted so I can now get on with spraying the turret and finishing the painting

:

Still no decals though

beefcake · « **Reply #417 on:** May 26, 2018, 09:16:16 AM »

Nice to see him with drink in hand. Great work.

Inso · « **Reply #418 on:** May 29, 2018, 01:50:30 PM »

The first command tank is coming along:

... and this arrived:

Squat Knight Titan proxy, anyone?!

Inso · « **Reply #419 on:** June 02, 2018, 12:40:34 PM »

Time flies when you are having fun

.

I won't be touching the mech until I have finished my tank company and with that in mind, I have started work on the next three. First, I converted a bunch of pens and hair ties into some plasma Cannons:

Then I washed all the sprues and assembled what I could before I needed to spray anything:

Finally, there was a break in the weather so I managed to get a single tank and all of its components, sprayed up before the can ran out of paint:

From now on, I will be back to painting everything one at a time

Steel Penguin · « **Reply #420 on:** June 02, 2018, 05:34:25 PM »

that is a very clever idea Inso

and like the previous versions looking good so far

Inso · « **Reply #421 on:** June 03, 2018, 04:17:58 PM »

Cheers

Now the third tank is finished (apart from the commander and decals) and the first of the plasma-tanks is base-coated, ready for a wash:

Hopefully, the first plasma-tank will be ready for decals by the end of the week... but who knows?

Inso · « **Reply #422 on:** June 04, 2018, 02:49:24 PM »

Just decals to go on the first platoon... but I reckon I'll leave the decals until all the tanks are painted

:

Inso · « **Reply #423 on:** June 06, 2018, 12:46:59 PM »

Here's a high quality (Windows Paint) mock-up of the markings for my tank company:

I have all the decals I need for all ten tanks. The yellow shape changes for each platoon/command so there will be 3 triangles, 3 squares and 3 circles with a diamond as the company commander.

I have all the decals except the names... but I have LOTS of decals which can be altered for that... or I can just paint the names (so they are properly individual).

beefcake · « **Reply #424 on:** June 08, 2018, 10:24:30 AM »

Love those plasma cannons.

News:

Author Topic: Another Space Dwarf conversion thread... (Read 249631 times)