976
Suggestions (HF) / ok, this is a little off the wall
« on: March 18, 2006, 10:58:59 AM »
Glasses: a head sprue (male and female) would be nice, also including sunglasses (and maybe even a monocle).
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 »
978
The Colouring-in Room / The Grymn need basing
« on: March 18, 2006, 10:33:29 AM »
Nice additions could also include:
a few small offcuts from cables or coated wires coming out of the ground to represent cables,
plastic sprue cut up and painted to look like smaller girders (or at least parts of them),
depending on size some cogwheels/ gears (broken and intact) properly rusted and weathered could be used as well,
if you can find some bits of coloured or clear plastic sheets you could use them for broken glass on the bases (add part of a window frame made out of plastic sprue as well),
other stuff to put on industrial bases include manholes, pipes protruding from the ground, bits of corroded corrugated "iron" sheeting
a few small offcuts from cables or coated wires coming out of the ground to represent cables,
plastic sprue cut up and painted to look like smaller girders (or at least parts of them),
depending on size some cogwheels/ gears (broken and intact) properly rusted and weathered could be used as well,
if you can find some bits of coloured or clear plastic sheets you could use them for broken glass on the bases (add part of a window frame made out of plastic sprue as well),
other stuff to put on industrial bases include manholes, pipes protruding from the ground, bits of corroded corrugated "iron" sheeting
979
The Colouring-in Room / Giant Worm I'm working on in GS "SAY AAAHHHHH
« on: March 18, 2006, 10:04:15 AM »Quote from: mastertickles
[...] i don't see where I send the image. [...]
Quoted from the monster sculpting contest thread:
Quote from: vardy
[...] Im wondering which e-mail to send them to (just looked at the suggestions@... and the orders@... ones you see)
Quote from: Big Boris
Either will do, they all wind up going in the same inbox folder on outlook express...
983
Hasslefree Babble / Is Sally the ultimate Spymaster(mistress?)
« on: March 17, 2006, 12:24:13 AM »Quote from: Ray's Bat
[...] meh, I have too much money anyway [...]
You could always send it to me...
984
Eye Candy / Aarons bohkin.
« on: March 17, 2006, 12:20:25 AM »
Names: will you stick to German(ish) names?
If so:
knapp (meaning short, narrow, scantily and a few other things as well).
wenig (~ few, little, sparse)
winzig (~ diminutive, minuscule, tiny)
If so:
knapp (meaning short, narrow, scantily and a few other things as well).
wenig (~ few, little, sparse)
winzig (~ diminutive, minuscule, tiny)
986
Suggestions (HF) / Bobs, Bobs, Malcolm!
« on: March 16, 2006, 10:17:06 PM »Quote from: Pr0fane
[...] ink; thanks for the larger pic.
No problem, wanted to know what birdmonkeys look like (trolls can be very curious creatures), so spending a tiny amount of time to let everyone else have a look too seemed like the polite thing to do.
987
Suggestions (HF) / Bobs, Bobs, Malcolm!
« on: March 16, 2006, 01:18:24 PM »
slightly bigger version of the pic I borrowed from the movie site
988
Tutorials / Requests for tutorials
« on: March 15, 2006, 08:58:06 AM »Quote from: Bodhi
I'd do the basic shape of the glasses then wait until the greenstuff has cured to "detail level" - it depends on 1. climate 2. The ratio of blue to yellow 3. The indoor climate of your particular apartment. In my apartment right now with a ratio of two yellow parts to one blue it's usually about one hour and forty minutes.
Once it has reached this level of hardness simply cut the frames around the glasses with a scalpel.
Or put the greenstuff in the freezer for a little while to harden it a bit (but be carefull as it will get softer again after being exposed to room temperature).
989
Maybe adding a bit moss to and around the tree? That way the boots could stay as they are and there'd be a bit of green to prevent the brown from being overwhelming.
On the tree I guess painting the moss on would be enough, on the ground you could use some green flocking material.
Two pics for a little inspiration: moss one, moss two
On the tree I guess painting the moss on would be enough, on the ground you could use some green flocking material.
Two pics for a little inspiration: moss one, moss two
990
Deathball / Alternate throwing rules
« on: March 13, 2006, 10:42:08 AM »
I guess you could just buy some blank dice and add the symbols using decals (there's different decal papers available for printing your own decals) or even simpler print the symbols onto those labels from avery and others.
991
Ideas for New Heresy Models / Fimirs, or something along that line.......
« on: March 12, 2006, 10:08:51 AM »Quote from: Hive Trygon
[..] oh and trolls, fat.
I can verify this statement (allthough I probably wouldn't describe meself as nasty meat eater).
992
Hasslefree Babble / Etched brass phase 2
« on: March 10, 2006, 03:57:36 PM »
And you could use the words 'honey, I bought you a grymn pendant'...
993
Hasslefree Babble / Kindred schedule, is there one
« on: March 10, 2006, 03:52:52 PM »
Yes, they're called kender and there was a place called Kendermore in the dragonlance books mentioned if I remember correctly (it's been quite a while since I read them).
994
Deathball / Pitch/ Arena
« on: March 08, 2006, 11:59:59 PM »
Slightly stupid question: did any of you ever try out vacuum forming?
I have been reading a bit about vacuum forming at home and thought it might be a good method to make a pitch.
Since you don't really seem to need much more than a box/ table with a frame that's connected to a vacuumcleaner, a frame to hold the plastic, an oven and a model (and time to experiment) it might be a cheap(ish) way to create a pitch or scenery for an arena.
I have been reading a bit about vacuum forming at home and thought it might be a good method to make a pitch.
Since you don't really seem to need much more than a box/ table with a frame that's connected to a vacuumcleaner, a frame to hold the plastic, an oven and a model (and time to experiment) it might be a cheap(ish) way to create a pitch or scenery for an arena.
995
The Colouring-in Room / Armoured SKULLMASHER
« on: March 05, 2006, 10:26:03 AM »
Nice horns, they look like they're hot and glowing!
996
General Ranting / a question of gaming
« on: March 02, 2006, 05:48:03 PM »
Another game that might be worth giving a try is Vor The Maelstrom (no, I'm not just suggesting this because I like Growlers).
It's a bit older and as I have said before I'm not a gamer (and thus have never played it) but maybe someone else here can tell you a bit more about the game.
As far as I know the rules are not that complicated and you can field anything from 6 to about 100 figs per side. Plus you can use what ever figs you want to.
It's a bit older and as I have said before I'm not a gamer (and thus have never played it) but maybe someone else here can tell you a bit more about the game.
As far as I know the rules are not that complicated and you can field anything from 6 to about 100 figs per side. Plus you can use what ever figs you want to.
997
General Ranting / a question of gaming
« on: March 01, 2006, 09:45:05 PM »
Not a gamer meself, but I would give Necromunda and/ or Mordheim a try, especially since you can download the rules for free.
998
Hasslefree / Amoy
« on: March 01, 2006, 01:06:12 AM »
Weapons that can be used as vehicles (or the other way round) are very practical you know...
Whenever I look at this version of Amoy I find meself thinking 'sk8 or die' would be an appropriate title. Really like the head/ face.
Whenever I look at this version of Amoy I find meself thinking 'sk8 or die' would be an appropriate title. Really like the head/ face.
999
General Ranting / FOD chatroom!
« on: February 24, 2006, 10:47:14 PM »
Hm, I think I'm gonna register just to find out if can get in without any problems.
1000
General Ranting / coolmini
« on: February 21, 2006, 12:49:01 PM »
All that shows up is a message :
Unable to connect
Firefox can't establish a connection to the server at coolminiornot.com
(and some more blabla)
Same thing happened a few days ago with the FOD but a few minutes later everything was fine again.
Unable to connect
Firefox can't establish a connection to the server at coolminiornot.com
(and some more blabla)
Same thing happened a few days ago with the FOD but a few minutes later everything was fine again.