Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Inso

1
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: April 15, 2018, 03:14:02 PM »
It's a Meng toon tank... all I have changed are the weapons :)

It makes conversion MUCH simpler than cutting up 1/35th Tamiya tanks :)

2
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: April 13, 2018, 07:13:52 PM »
TANK!



(just base coated at the moment... but yes... that IS paint on there :) ).

3
The Colouring-in Room / Re: BIG Dwarfs.
« on: March 29, 2018, 10:24:44 AM »
I will do :) ... but for now, this will have to do:







EDIT:


4
The Colouring-in Room / BIG Dwarfs.
« on: March 27, 2018, 06:49:46 PM »
Seeing as GW have a new Squat in the pipeline... This one, in fact:

https://www.pinterest.co.uk/pin/580542208189528077/

I thought I would see what I could come up with to get into the spirit of things. This image is self explanatory:



I have another two on the go at the moment; one with a heavy-bolter and one with a flamer and they should be finished pretty quickly because of the minimal conversion work. I think that they will all be about the same height as the new Necromunda Squat so the big question is...

... where does it go from here?   :shock:

5
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: March 25, 2018, 04:44:29 PM »
The competition sculpt (Squat Berserker) has been cast up and I was sent a couple of copies so I painted one up:



A bit of back-story :) :

https://i.imgur.com/2lt2MPo.jpg

6
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: March 16, 2018, 05:12:38 PM »
I have now primed the dreads:



Now that I have got as far as I can with them, I thought I'd see what I could find in the loft and managed to uncover my Bullgryn squad. Only one of them had been converted... and he didn't have any weapons but luckily, I had thought about that earlier and bagged a lot of Bullgryn bits from EBay. With the bits already available, it was merely a case of a bit of sawing, drilling, pinning and gluing and I soon ended up with this:



He's a converted, Mantic, Dreadball Ork with GW weapons. He still needs some putty work to fill gaps and sort out a few niggles... but he's pretty much there :) . I have another four sat in a box beside me so I have enough for a squad of five. Tidy :) .

7
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: March 15, 2018, 09:54:16 AM »
These are now as finished as they will ever be. Thorsen on the left, Ranulf on the right :) :



They will be glued down and then I will prime them as soon as the weather lifts :)

8
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: March 13, 2018, 08:01:47 PM »
Nearly finished :) :


9
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: March 12, 2018, 08:08:16 PM »
In other news... the Squat Berserker has been sold to Short Wars now :) . He will be available from here in good time:

http://www.shortwars.co.uk/

The miniature in question didn't fare particularly well in the competition but the ones above it were worthy of being there. Here's my now posted Berserker:



As for the Halfling snipers... they can now be found for sale over at CP models :) :

https://cpmodels.co.uk/product/ru13-halfling-snipers-full-gillie-suits/

Most of the money from the sculpts I have sold has gone to charitable causes so everyone is a winner :)

10
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: March 08, 2018, 11:40:42 AM »
I hope it goes well for you and you get your work out there in 'shop land' :) ... It's always cool when that happens.

In today's little update, a top hatch, handle, front vent and some eyebrows have been added. Just for the record, the arms and top weapons are not glued in place yet... and the bodies are not attached to the base (so the pose hasn't been fixed yet) :) :



I will be fettling the bodies and getting them finished before moving on to the arms :) .

11
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: March 05, 2018, 08:46:36 AM »
"You've made me want to 3d sculpt my own walkers."

Get on it! If you have the facilities, why haven't you done it already? ;)

12
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: March 04, 2018, 02:37:06 PM »
The guns have been added. Next will be detailing :) :


13
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: March 02, 2018, 08:30:37 PM »
Something for the army again; this time, it's a pair of Dreadnoughts to go with the Space Marine component of the organisation. Obviously, I can't just get a dreadnought or two. That would be too easy... so I bought a box of Mechanicus robots and here we are. Still WIP but I am getting there :) :


14
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: February 22, 2018, 04:01:53 PM »

15
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: February 21, 2018, 09:07:08 AM »
The berserker is just having the hammer and a holstered pistol. That way, it can become a fantasy miniature simply by converting the holster into another pouch :)

16
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: February 20, 2018, 11:20:43 AM »
I will get the new Necromunda Squat when he's released... not because I want to but because I have to :)

I do not like Beesputty. I have never tried it but I don't like the way it looks grainy and that it has a tendency to crack when you bake it.

I have decided that I am happy with Green Stuff, Brown Stuff and the odd bit of milliput here and there... and all of those are air drying :)

If Beesputty works for you, keep practicing :)

17
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: February 20, 2018, 09:20:24 AM »
Cheers :) . They arrived with him on Saturday and he is pleased with them so that's a good thing :)

In other news, I have been working on a sculpt for a competition over on Facebook. It's a Squat Berserker (still WIP):



Nearly there, just the hammer and a few other little bits to go.

18
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: February 15, 2018, 07:30:15 PM »
In a rather interesting turn of events... do you remember these?:



Well, I have sold the greens to CP Models and they will be available in the near future :) :

https://cpmodels.co.uk/

19
General Ranting / Re: Anyone still here?
« on: February 07, 2018, 06:47:33 AM »
Sadly, this is it really :(

Facebook has sort of killed the forums...

20
General Ranting / Re: Anyone still here?
« on: February 06, 2018, 04:17:06 PM »
There are one or two of us that still pop by occasionally... but I fear that Facebook has killed off all but the most voracious of forums now :(

By "after serious health issues", I am hoping that you are now fully recovered and fighting fit :)

21
The Colouring-in Room / Re: Demiurg.
« on: February 03, 2018, 03:09:44 PM »
I've been looking at the Boromite drones (and the hauler) and they may join the party :)

In other news, I have been trying to get the project moving by removing the need to sculpt every head. As a result, I decided to try using an old style, Mantic Steel Warrior head (now called militia) and this is what I ended up with:



He is a standard mechanic/engineer and has the usual Anvil Industry weapons and pack. I think the large size of the helmet works very well and I am going to continue with a few more of these :) .

22
Hasslefree / Re: A few old friends are visiting...
« on: February 03, 2018, 09:27:12 AM »
Cool :)

23
Hasslefree / Re: Grymn Viper K.I.S.S. Tank
« on: January 29, 2018, 07:22:30 AM »
Very cool :)

They fit nicely :)

24
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: January 27, 2018, 09:20:11 PM »
Harker is finished :) :



Next will be Dutch (platoon commander :) ).

25
The Colouring-in Room / Re: Another Space Dwarf conversion thread...
« on: January 26, 2018, 01:45:26 PM »
No... the tobacco spit goes on the boots of his enemies :D!